runtime: state_get leaked its value on every call

char* result = el_strdup_persist(e ? e->value : "");   // never freed
    pthread_mutex_unlock(&_state_mu);
    char* copy = el_strdup(result);                        // arena-tracked
    return el_wrap_str(copy);

Two copies were made. `result` existed only as the source for `copy` — never
returned, never freed — and el_strdup_persist bypasses the arena BY DESIGN
("state_set, engram internals"), so arena-pop could never reclaim it. Every
state_get leaked its full value string, permanently.

MEASURED: 200,000 state_get calls against a 64-byte value.
    before   15 MB peak RSS growth   (~75 bytes/call — the value plus overhead)
    after     0 MB

IMPACT. The soul's awareness loop has 68 state_get call sites and ticks every
200ms. Live measurement before the fix: RSS climbing 112 MB per 20s, about
19 GB/hour, in awareness_run -> one_cycle -> perceive, while node_count stayed
flat at ~13,479 — growth with no data behind it. It drove the host from 20 GB
free to 4.3 GB in roughly an hour.

WHY NOW, since the code is old: the soul used to restart constantly (no
write-through, divergent graph, 2.11 GB). Stabilising it (neuron #162) let it
stay up long enough to accumulate. The fix did not cause this leak; it removed
the crashes that were hiding it. Same pattern as the test framework surfacing
math_log — the defect was always there, something finally made it visible.

Found by Ishikawa rather than by reading the nearest code: method (arena
push/pop IS correctly paired per tick), material (node count flat, so not data
growth), environment (19 GB/hr / 18,000 ticks = ~1.1 MB per tick, so per-tick
not one-shot), machine (an allocator that bypasses the arena) — which is where
the evidence pointed.

el_strdup tracks into the thread-local arena, which touches no shared state, so
taking the single copy under _state_mu is safe and removes the temporary
entirely.

Verified: self-hosting fixpoint byte-identical; state round-trip correct for
hit, miss, and overwrite.

DESIGN.md

@@ -61,6 +61,13 @@ Per test file, current build model:
 | `cc` test .c → .o | 0.02s |
 | link | 0.02s |
 
+> **STALE as of el #132 — re-measured 2026-08-16.** The `test_compiler` figure below was
+> *entirely* the `strlen`-per-character quadratic, now fixed. Re-measured on the same host:
+> **3.58s → 0.03s (119x)**, and the 422 KB compiler concatenation likewise compiles in 0.03s.
+> The table is retained only as the historical record that motivated the gate. The remaining
+> per-file cost is the redundant `el_runtime.c` rebuild, which §9's compile-once architecture
+> addresses.
+
 Per-file `elc` time across the existing suite:
 
 | File | Bytes | elc time |
@@ -416,6 +423,48 @@ Wall-clock needs statistics. **Allocation counts do not.** They are perfectly de
 > a level. That is why the gate fits a curve across a sweep instead of comparing one number to a
 > threshold.
 
+> **Second correction, same day — THE ALLOCATION GATE ALONE WOULD HAVE MISSED THE REAL BUG.**
+>
+> el #132 found the actual elc quadratic: `strlen()` called inside `str_char_code()` and
+> `str_slice()`, so the lexer rescanned the remaining input on every character. Pure CPU.
+> **Zero allocation.** `str_char_code` is a bounds check and an index — it allocates nothing.
+>
+> Measured on three controlled specimens (`lang/.work/fitprobe.el`), growth ratio per doubling of
+> n across n = 200/400/800/1600:
+>
+> | specimen | allocs | bytes | time | what it proves |
+> |---|---|---|---|---|
+> | `linear` — one alloc per item | 2.00 2.00 2.00 → **O(n)** | 2.16 2.07 2.23 → **O(n)** | 0.83 2.00 2.05 → **O(n)** | clean baseline |
+> | `accum` — rebuilds accumulator | 2.00 2.00 2.00 → **O(n)** | 3.97 3.99 3.99 → **O(n²)** | noisy | count misses, **bytes catches** |
+> | `compute` — n scans over n chars | 0 → **FLAT** | 0 → **FLAT** | 3.93 4.01 3.96 → **O(n²)** | **both alloc signals blind; only time catches** |
+>
+> `compute` is el #132's shape exactly. A gate fitting only allocation count and bytes classifies
+> it as FLAT and passes it. **The gate as originally specified would not have caught the defect it
+> was created for.**
+>
+> Therefore the gate fits **THREE** signals and fails if ANY exceeds its declared curve:
+>
+> ```
+> bench "elc_compile" over n in [...] expect time O(n) allocs O(n) bytes O(n) { ... }
+> ```
+>
+> - **allocs (count)** — deterministic, zero-noise. Catches per-item allocation growth.
+> - **allocs (bytes)** — deterministic, zero-noise. Catches accumulator-rebuild quadratics that
+>   count cannot see.
+> - **time** — noisy, needs the sweep and statistics. The ONLY signal that sees pure-compute
+>   complexity regressions. Gate on the fitted *exponent*, never on absolute duration, so CI
+>   hardware variance scales the coefficient and leaves the classification intact.
+>
+> The deterministic signals remain preferable where they apply — they need no statistics and are
+> correct on the first run. They are simply not sufficient.
+>
+> **`black_box` is mandatory, and consuming the result is NOT enough.** The first version of
+> `compute` accumulated `total + 1` in a nested loop and reported **0 µs at every n** while
+> returning a numerically correct n². Clang recognised the idiom and closed the loop to a
+> multiply. Feeding the result into output did not prevent it. Only making the inner operation an
+> opaque external call restored the real curve. A benchmark harness that trusts the user to defeat
+> the optimiser will silently measure nothing — and report success while doing it.
+
 Instrument the runtime with allocation counters and fit *those* against n instead of time:
 
 ```el

lang/el-compiler/src/codegen.el

@@ -862,10 +862,23 @@ fn cg_expr(expr: Map<String, Any>) -> String {
             // arithmetic BinOp (or vice-versa). Without this check the
             // fallthrough to str_eq produces str_eq(int_value, int_value)
             // which reads the integer as a char* and segfaults.
+            // EITHER side provably Int is enough. Requiring BOTH meant a call
+            // whose return type codegen cannot infer poisoned the operator:
+            //     getint(5) == a      ->  str_eq(getint(5), a)
+            // even with `a` declared Int. str_eq then reads an integer as a
+            // char* and segfaults. Only an integer LITERAL on one side forced
+            // the numeric form, so the bug was invisible in the common case.
+            //
+            // Loosening to OR is strictly safer: when one side is a known Int,
+            // str_eq is always wrong (it dereferences that int), while numeric
+            // comparison is at worst a wrong answer on an already ill-typed
+            // program. When neither side is Int nothing changes, so string
+            // comparison is untouched.
             if is_int_expr(left) {
-                if is_int_expr(right) {
-                    return "(" + left_c + " == " + right_c + ")"
-                }
+                return "(" + left_c + " == " + right_c + ")"
+            }
+            if is_int_expr(right) {
+                return "(" + left_c + " == " + right_c + ")"
             }
             // Float literal or negative float literal: use plain == (bit-equal
             // el_val_t comparison). This handles `r0 == 3.0`, `neg == -3.0`, etc.
@@ -921,10 +934,12 @@ fn cg_expr(expr: Map<String, Any>) -> String {
             }
             // Same mixed Ident/BinOp fix as EqEq: use is_int_expr to detect
             // integer-typed operands before falling through to !str_eq.
+            // Either side Int is enough — see the EqEq note above.
             if is_int_expr(left) {
-                if is_int_expr(right) {
-                    return "(" + left_c + " != " + right_c + ")"
-                }
+                return "(" + left_c + " != " + right_c + ")"
+            }
+            if is_int_expr(right) {
+                return "(" + left_c + " != " + right_c + ")"
             }
             // Float-typed operands use plain != (bit-equal comparison).
             if is_float_expr(left) {
@@ -1495,6 +1510,11 @@ fn cg_stmt(stmt: Map<String, Any>, indent: String, declared: [String]) -> [Strin
         if str_eq(ltype, "Int") {
             add_int_name(name)
         }
+        // Same as params: Bool is an int in the value model. Without this a
+        // `let ok: Bool = ...` compared to another Bool lowered to str_eq.
+        if str_eq(ltype, "Bool") {
+            add_int_name(name)
+        }
         if str_eq(ltype, "Float") {
             add_float_name(name)
         }
@@ -2887,6 +2907,7 @@ fn builtin_arity(name: String) -> Int {
     if str_eq(name, "el_alloc_count") { return 0 }
     if str_eq(name, "el_alloc_bytes") { return 0 }
     if str_eq(name, "el_peak_rss") { return 0 }
+    if str_eq(name, "el_black_box") { return 1 }
     if str_eq(name, "engram_neighbors_json") { return 3 }
     if str_eq(name, "engram_activate_json") { return 2 }
     if str_eq(name, "engram_stats_json") { return 0 }
@@ -3112,6 +3133,15 @@ fn build_int_names_for_params(params: [Map<String, Any>]) -> Bool {
         if str_eq(ptype, "Int") {
             add_int_name(pname)
         }
+        // Bool is an integer in the value model (type_to_c maps Bool -> "int";
+        // el_runtime.h: "Bool -> el_val_t (0 = false, nonzero = true)"), but
+        // Bool names were registered nowhere. So `cond == want` between two
+        // Bool params fell through to str_eq and dereferenced 0 or 1 as a
+        // char* — an immediate segfault. Track them as int-like, which is what
+        // they are.
+        if str_eq(ptype, "Bool") {
+            add_int_name(pname)
+        }
         if str_eq(ptype, "Float") {
             add_float_name(pname)
         }

lang/el-compiler/src/compiler.el

@@ -419,6 +419,22 @@ fn resolve_imports(src_path: String) -> String {
     if !str_eq(already, "") { return "" }
     state_set(seen_key, "1")
 
+    // A missing file must be a hard error, never an empty string.
+    //
+    // fs_read returns "" both for "file is empty" and "file does not exist", and
+    // this function used the value without distinguishing them. So a broken
+    // import path — a typo, a moved file, a relative path resolved from the
+    // wrong working directory — compiled CLEANLY: exit 0, empty stderr, and a
+    // program silently missing everything it imported. Observed 2026-08-15:
+    // eleven consecutive "successful" compiles that had included no runtime at
+    // all, and a wrong conclusion drawn from them before anyone noticed.
+    //
+    // Missing dependency, confident success. fs_exists separates the two cases,
+    // so a genuinely empty file still resolves to "" and is fine.
+    if !fs_exists(src_path) {
+        println("elc: cannot resolve import: " + src_path)
+        exit_program(1)
+    }
     let source: String = fs_read(src_path)
     let dir: String = dirname_of(src_path)
     let lines: [String] = str_split(source, "\n")

lang/runtime/el_runtime.c

@@ -476,12 +476,14 @@ typedef struct {
 static ElList* list_alloc(int64_t cap) {
     if (cap < 4) cap = 4;
     ElList* lst = malloc(sizeof(ElList));
+    _el_alloc_count++; _el_alloc_bytes += sizeof(ElList);
     if (!lst) { fputs("el_runtime: out of memory\n", stderr); exit(1); }
     lst->hdr.magic = EL_MAGIC_LIST;
     lst->hdr.refcount = 1;
     lst->length   = 0;
     lst->capacity = cap;
     lst->elems    = malloc((size_t)cap * sizeof(el_val_t));
+    _el_alloc_count++; _el_alloc_bytes += (size_t)cap * sizeof(el_val_t);
     if (!lst->elems) { fputs("el_runtime: out of memory\n", stderr); exit(1); }
     return lst;
 }
@@ -531,6 +533,7 @@ el_val_t el_list_append(el_val_t listv, el_val_t elem) {
         if (old->length >= old->capacity) {
             int64_t new_cap = old->capacity > 0 ? old->capacity * 2 : 4;
             el_val_t* grown = realloc(old->elems, (size_t)new_cap * sizeof(el_val_t));
+            _el_alloc_count++; _el_alloc_bytes += (size_t)new_cap * sizeof(el_val_t);
             if (!grown) { fputs("el_runtime: out of memory\n", stderr); exit(1); }
             old->elems    = grown;
             old->capacity = new_cap;
@@ -543,12 +546,14 @@ el_val_t el_list_append(el_val_t listv, el_val_t elem) {
     int64_t new_cap = old->length + 1;
     if (new_cap < 4) new_cap = 4;
     ElList* fresh = malloc(sizeof(ElList));
+    _el_alloc_count++; _el_alloc_bytes += sizeof(ElList);
     if (!fresh) { fputs("el_runtime: out of memory\n", stderr); exit(1); }
     fresh->hdr.magic    = EL_MAGIC_LIST;
     fresh->hdr.refcount = 1;
     fresh->length       = old->length + 1;
     fresh->capacity     = new_cap;
     fresh->elems        = malloc((size_t)new_cap * sizeof(el_val_t));
+    _el_alloc_count++; _el_alloc_bytes += (size_t)new_cap * sizeof(el_val_t);
     if (!fresh->elems) { fputs("el_runtime: out of memory\n", stderr); exit(1); }
     if (old->length > 0) {
         memcpy(fresh->elems, old->elems, (size_t)old->length * sizeof(el_val_t));
@@ -570,12 +575,14 @@ el_val_t el_list_clone(el_val_t listv) {
     if (cap < old->length) cap = old->length;
     if (cap < 4) cap = 4;
     ElList* fresh = malloc(sizeof(ElList));
+    _el_alloc_count++; _el_alloc_bytes += sizeof(ElList);
     if (!fresh) { fputs("el_runtime: out of memory\n", stderr); exit(1); }
     fresh->hdr.magic    = EL_MAGIC_LIST;
     fresh->hdr.refcount = 1;
     fresh->length       = old->length;
     fresh->capacity     = cap;
     fresh->elems        = malloc((size_t)cap * sizeof(el_val_t));
+    _el_alloc_count++; _el_alloc_bytes += (size_t)cap * sizeof(el_val_t);
     if (!fresh->elems) { fputs("el_runtime: out of memory\n", stderr); exit(1); }
     if (old->length > 0) {
         memcpy(fresh->elems, old->elems, (size_t)old->length * sizeof(el_val_t));
@@ -596,6 +603,7 @@ typedef struct {
 static ElMap* map_alloc(int64_t cap) {
     if (cap < 4) cap = 4;
     ElMap* m = malloc(sizeof(ElMap));
+    _el_alloc_count++; _el_alloc_bytes += sizeof(ElMap);
     if (!m) { fputs("el_runtime: out of memory\n", stderr); exit(1); }
     m->hdr.magic    = EL_MAGIC_MAP;
     m->hdr.refcount = 1;
@@ -671,6 +679,7 @@ el_val_t el_map_set(el_val_t mapv, el_val_t keyv, el_val_t value) {
     int64_t new_cap = m->count + 1;
     if (new_cap < 4) new_cap = 4;
     ElMap* fresh = malloc(sizeof(ElMap));
+    _el_alloc_count++; _el_alloc_bytes += sizeof(ElMap);
     if (!fresh) { fputs("el_runtime: out of memory\n", stderr); exit(1); }
     fresh->hdr.magic    = EL_MAGIC_MAP;
     fresh->hdr.refcount = 1;
@@ -5159,10 +5168,23 @@ el_val_t state_get(el_val_t key) {
     if (!k) return el_wrap_str(el_strdup(""));
     pthread_mutex_lock(&_state_mu);
     StateEntry* e = state_find(k);
-    char* result = el_strdup_persist(e ? e->value : "");
+    /* ONE arena-tracked copy, taken under the lock.
+     *
+     * This used to make TWO copies: an el_strdup_persist temporary, then an
+     * arena-tracked copy of that temporary. The persistent one was never
+     * returned and never freed — el_strdup_persist bypasses the arena by
+     * design ("state_set, engram internals"), so arena-pop could not reclaim
+     * it. Every state_get therefore leaked its full value string, permanently.
+     *
+     * The soul's awareness loop has 68 state_get call sites and ticks every
+     * 200ms; measured leak was ~1.1 MB per tick, about 19 GB/hour. It went
+     * unnoticed for as long as the soul restarted often enough to mask it.
+     *
+     * el_strdup tracks into the thread-local arena, which touches no shared
+     * state, so doing it under _state_mu is safe and removes the need for the
+     * temporary entirely. */
+    char* copy = el_strdup(e ? e->value : "");
     pthread_mutex_unlock(&_state_mu);
-    /* wrap in arena-tracked copy for the caller's request lifetime */
-    char* copy = el_strdup(result);
     return el_wrap_str(copy);
 }
 
@@ -18513,6 +18535,26 @@ el_val_t engram_pool_stats_json(void) {
 el_val_t el_alloc_count(void) { return (el_val_t)(int64_t)_el_alloc_count; }
 el_val_t el_alloc_bytes(void) { return (el_val_t)(int64_t)_el_alloc_bytes; }
 
+/* el_black_box — optimisation barrier for benchmark bodies.
+ *
+ * WHY THIS IS NOT OPTIONAL. A benchmark whose result is unused is dead code,
+ * and CONSUMING THE RESULT IS NOT SUFFICIENT: clang recognises loop idioms and
+ * closes them to arithmetic. A nested `total = total + 1` loop measured at
+ * 0 microseconds for every n while returning a numerically correct n*n --
+ * the answer was right and the work never happened.
+ *
+ * That is the same failure shape as a test that never ran reporting pass. The
+ * harness must own the barrier rather than trusting the benchmark author to
+ * defeat the optimiser.
+ *
+ * The constraint "+r" forces the value through a register the compiler must
+ * treat as both read and written by opaque code; the "memory" clobber stops
+ * loads and stores being reordered across it or elided. Emits no instructions. */
+el_val_t el_black_box(el_val_t v) {
+    __asm__ __volatile__("" : "+r"(v) : : "memory");
+    return v;
+}
+
 el_val_t el_peak_rss(void) {
     struct rusage ru;
     if (getrusage(RUSAGE_SELF, &ru) != 0) return (el_val_t)0;

lang/runtime/el_runtime.h

@@ -1022,6 +1022,7 @@ el_val_t  el_mem_check(void);
 el_val_t  el_alloc_count(void);
 el_val_t  el_alloc_bytes(void);
 el_val_t  el_peak_rss(void);
+el_val_t  el_black_box(el_val_t v);
 
 /* Semantic retrieval surface. NOT interchangeable with engram_search_json,
  * which is lexical by design — see the note at the definition. */

lang/runtime/elbench.el

@@ -0,0 +1,256 @@
+// runtime/elbench.el — growth-curve classifier and complexity gate.
+//
+// Given a geometric sweep of input sizes and the measurements taken at each,
+// classify the growth curve and decide whether it violates a declared bound.
+//
+// ── Why this exists ──────────────────────────────────────────────────────────
+//
+// Constant-factor regressions are annoying. Complexity regressions are outages.
+// An O(n) lookup inside an O(n) loop is invisible at n=100 in a unit test and
+// catastrophic at n=100000 in production. el #132 was exactly that: a strlen()
+// inside a per-character accessor, quadratic, shipped for months.
+//
+// ── THREE signals, not one ───────────────────────────────────────────────────
+//
+// The gate fits time AND allocation-count AND allocation-bytes, and fails if
+// ANY of them exceeds its declared curve. This is not belt-and-braces; each
+// signal is blind to a real defect class the others catch:
+//
+//   * A copy-on-write accumulator rebuilding its buffer allocates ONCE per
+//     iteration — count is exactly linear — while bytes go quadratic.
+//     Count alone passes it.
+//   * el #132's strlen-per-character is pure CPU and allocates NOTHING.
+//     Both allocation signals read FLAT. Only time catches it.
+//
+// The deterministic signals (count, bytes) are preferable where they apply:
+// no statistics, correct on the first run, machine-independent. They are
+// simply not sufficient.
+//
+// ── SCOPE LIMIT — read this before trusting a flat curve ─────────────────────
+//
+// The allocation counters track EL-LEVEL allocation only: strings, ElList and
+// ElMap bodies, their backing arrays, copy-on-write clones, and the realloc
+// growth path. malloc inside engram_*.c and inside libcurl is NOT counted.
+//
+// A flat allocation curve over a workload dominated by engram or HTTP calls is
+// therefore NOT evidence of anything. It means "no El-level allocation growth",
+// not "no allocation growth". Gate El-level complexity with this; do not read
+// third-party memory behaviour into it.
+//
+// ── Classification method ────────────────────────────────────────────────────
+//
+// Sizes must form a geometric sweep (each n double the last). On such a sweep
+// the ratio between consecutive measurements IS the growth exponent, directly:
+//
+//     O(1)  -> 1.0     O(log n) -> ~1.1     O(n) -> 2.0
+//     O(n log n) -> ~2.2     O(n^2) -> 4.0     O(n^3) -> 8.0
+//
+// DEVIATION FROM DESIGN.md 6.2, stated plainly: that section specified Google
+// Benchmark's one-parameter least-squares fit over candidate curves. This uses
+// consecutive ratios instead. The sweep is mandated geometric either way, and
+// on a geometric sweep ratios are directly interpretable and need no floating
+// point. The cost is weaker separation between O(n) and O(n log n), which is
+// reported honestly as an ambiguous band rather than guessed at. Least-squares
+// remains the better answer if that band ever needs to be resolved.
+//
+// All arithmetic is fixed-point, scaled by 1000 ("milli-ratio"), so a ratio of
+// 2.0 is 2000. El values are int64; this avoids float-in-list handling.
+
+// Curve identifiers. Ordered by growth — the ordering IS the comparison used
+// by the gate, so an index comparison decides "worse than declared".
+//   0 = O(1)   1 = O(log n)   2 = O(n)   3 = O(n log n)   4 = O(n^2)   5 = O(n^3)
+
+fn elb_curve_name(c: Int) -> String {
+    if c == 0 { return "O(1)" }
+    if c == 1 { return "O(log n)" }
+    if c == 2 { return "O(n)" }
+    if c == 3 { return "O(n log n)" }
+    if c == 4 { return "O(n^2)" }
+    if c == 5 { return "O(n^3)" }
+    return "O(?)"
+}
+
+fn elb_curve_from_name(s: String) -> Int {
+    if str_eq(s, "O(1)") { return 0 }
+    if str_eq(s, "O(log n)") { return 1 }
+    if str_eq(s, "O(n)") { return 2 }
+    if str_eq(s, "O(n log n)") { return 3 }
+    if str_eq(s, "O(n^2)") { return 4 }
+    if str_eq(s, "O(n^3)") { return 5 }
+    return -1
+}
+
+// elb_classify_ratio — map a milli-ratio-per-doubling onto a curve.
+//
+// Bands are deliberately wide at the top (a quadratic measured at 3.4x is
+// still a quadratic) and deliberately overlap-averse at the bottom, where a
+// misclassification between O(1) and O(log n) matters least.
+fn elb_classify_ratio(milli: Int) -> Int {
+    if milli < 1300 { return 0 }
+    if milli < 1700 { return 1 }
+    if milli < 2400 { return 2 }
+    if milli < 3200 { return 3 }
+    if milli < 6000 { return 4 }
+    return 5
+}
+
+// elb_ratio — milli-ratio between two consecutive measurements.
+// Returns -1 when the earlier measurement is zero (ratio undefined).
+fn elb_ratio(prev: Int, cur: Int) -> Int {
+    if prev <= 0 { return -1 }
+    return (cur * 1000) / prev
+}
+
+// ── The measurement floor ────────────────────────────────────────────────────
+//
+// A benchmark whose largest measurement is at or near zero has not been
+// measured. Reporting it as O(1) would be a confident answer with nothing
+// behind it — the same failure as a test that never ran reporting pass, and
+// exactly what happened when clang closed a nested loop to a multiply and the
+// harness read 0 microseconds at every n.
+//
+// So: REFUSE. Never classify below the floor.
+fn elb_below_floor(vals: [Int], floor: Int) -> Bool {
+    let n: Int = native_list_len(vals)
+    let i: Int = 0
+    let mx: Int = 0
+    while i < n {
+        let v: Int = native_list_get(vals, i)
+        if v > mx { let mx = v }
+        let i = i + 1
+    }
+    if mx < floor { return true }
+    return false
+}
+
+// elb_implausibly_flat — a measurement that does not move across a sweep whose
+// input grew by 8x or more is not a flat curve, it is a broken measurement.
+// Genuine O(1) work still shows noise; a hard-flat series means the work was
+// optimised away, the timer has insufficient resolution, or the benchmark body
+// never executed.
+fn elb_implausibly_flat(vals: [Int]) -> Bool {
+    let n: Int = native_list_len(vals)
+    if n < 3 { return false }
+    let first: Int = native_list_get(vals, 0)
+    let last: Int = native_list_get(vals, n - 1)
+    if first == 0 {
+        if last == 0 { return true }
+        return false
+    }
+    let r: Int = (last * 1000) / first
+    if r < 1100 { return true }
+    return false
+}
+
+// elb_spread_ok — do the consecutive ratios agree with each other?
+//
+// This is the ratio-method analogue of a normalised-RMS threshold. If the
+// doublings disagree wildly the data is noise, a cache cliff, or a phase
+// change, and the honest report is INDETERMINATE rather than a classification.
+// Applies to the ASYMPTOTIC TAIL only — the last three ratios.
+//
+// The small-n end of any sweep is dominated by fixed overhead, cold caches and
+// branch predictors that have not warmed. Measured on a genuinely linear
+// character scan, the ratios ran 3.37, 2.92, 1.76, 1.65: the head looks
+// quadratic, the tail is the truth. Checking spread across the whole sweep
+// therefore rejects correct data. A complexity bound is an asymptotic claim, so
+// it is judged on the asymptotic region — the same reason a benchmark harness
+// discards warmup rather than averaging it in.
+fn elb_spread_ok(ratios: [Int]) -> Bool {
+    let total: Int = native_list_len(ratios)
+    if total < 2 { return true }
+    let start: Int = total - 3
+    if start < 0 { let start = 0 }
+    let n: Int = total
+    let lo: Int = 999999
+    let hi: Int = 0
+    let i: Int = start
+    while i < n {
+        let r: Int = native_list_get(ratios, i)
+        if r >= 0 {
+            if r < lo { let lo = r }
+            if r > hi { let hi = r }
+        }
+        let i = i + 1
+    }
+    if lo <= 0 { return false }
+    // Reject when the widest ratio is more than 2.2x the narrowest. That is
+    // enough slack for real timing noise and tight enough to separate a clean
+    // 2.0 series from a clean 4.0 series.
+    if (hi * 1000) / lo > 2200 { return false }
+    return true
+}
+
+// elb_ratios — consecutive milli-ratios across the sweep.
+fn elb_ratios(vals: [Int]) -> [Int] {
+    let out: [Int] = native_list_empty()
+    let n: Int = native_list_len(vals)
+    let i: Int = 1
+    while i < n {
+        let out = native_list_append(out,
+            elb_ratio(native_list_get(vals, i - 1), native_list_get(vals, i)))
+        let i = i + 1
+    }
+    return out
+}
+
+// elb_mean_tail_ratio — mean of the LAST TWO ratios.
+//
+// The tail is used deliberately: asymptotic behaviour is what a complexity
+// bound claims, and the small-n end of any sweep is dominated by fixed
+// overhead. This is the same reason a benchmark harness discards warmup.
+fn elb_mean_tail_ratio(ratios: [Int]) -> Int {
+    let n: Int = native_list_len(ratios)
+    if n == 0 { return -1 }
+    if n == 1 { return native_list_get(ratios, 0) }
+    let a: Int = native_list_get(ratios, n - 1)
+    let b: Int = native_list_get(ratios, n - 2)
+    if a < 0 { return b }
+    if b < 0 { return a }
+    return (a + b) / 2
+}
+
+// ── Verdicts ─────────────────────────────────────────────────────────────────
+//
+//   0 PASS           measured curve is at or below the declared bound
+//   1 FAIL           measured curve is strictly worse than declared
+//   2 INDETERMINATE  ratios disagree; data is noise or a phase change
+//   3 REFUSED        below the measurement floor, or implausibly flat
+//   4 BETTER         measured strictly better than declared (warn, not fail)
+
+fn elb_verdict_name(v: Int) -> String {
+    if v == 0 { return "PASS" }
+    if v == 1 { return "FAIL" }
+    if v == 2 { return "INDETERMINATE" }
+    if v == 3 { return "REFUSED" }
+    if v == 4 { return "BETTER" }
+    return "?"
+}
+
+// elb_gate — classify one signal against its declared bound.
+//
+//   vals     measurements, one per sweep point, in sweep order
+//   expect   declared curve index (see elb_curve_name)
+//   floor    minimum largest-measurement below which we refuse to classify
+fn elb_gate(vals: [Int], expect: Int, floor: Int) -> Int {
+    if elb_below_floor(vals, floor) { return 3 }
+    if elb_implausibly_flat(vals) { return 3 }
+    let ratios: [Int] = elb_ratios(vals)
+    if !elb_spread_ok(ratios) { return 2 }
+    let m: Int = elb_mean_tail_ratio(ratios)
+    if m < 0 { return 2 }
+    let got: Int = elb_classify_ratio(m)
+    if got > expect { return 1 }
+    if got < expect { return 4 }
+    return 0
+}
+
+// elb_measured_curve — the classified curve for a signal, or -1 if unclassifiable.
+fn elb_measured_curve(vals: [Int], floor: Int) -> Int {
+    if elb_below_floor(vals, floor) { return -1 }
+    if elb_implausibly_flat(vals) { return -1 }
+    let ratios: [Int] = elb_ratios(vals)
+    let m: Int = elb_mean_tail_ratio(ratios)
+    if m < 0 { return -1 }
+    return elb_classify_ratio(m)
+}

lang/tests/bench/fitprobe.el

@@ -0,0 +1,91 @@
+// fitprobe.el — controlled growth-curve specimens for validating the complexity fitter.
+//
+// Three deliberately-shaped workloads. None depends on a real defect existing,
+// which is the point: the fitter must be provable against KNOWN curves.
+//
+//   linear   — one allocation per item.        count O(n),  bytes O(n),   time O(n)
+//   accum    — rebuilds its accumulator.       count O(n),  bytes O(n^2), time O(n^2)
+//   compute  — nested arithmetic, no alloc.    count O(1),  bytes O(1),   time O(n^2)
+//
+// `compute` is the specimen that matters. It is the shape of el #132
+// (strlen-per-character inside str_char_code): pure CPU, zero allocation.
+// An allocation-only gate is structurally blind to it.
+//
+// No imports — uses runtime builtins directly so nothing collides.
+
+fn work_linear(n: Int) -> Int {
+    let parts: [String] = native_list_empty()
+    let i: Int = 0
+    while i < n {
+        let parts = native_list_append(parts, int_to_str(i))
+        let i = i + 1
+    }
+    return native_list_len(parts)
+}
+
+fn work_accum(n: Int) -> Int {
+    let acc: String = ""
+    let i: Int = 0
+    while i < n {
+        let acc = acc + "x"
+        let i = i + 1
+    }
+    return str_len(acc)
+}
+
+fn work_compute(n: Int) -> Int {
+    // str_char_code is an opaque external call, so the C optimiser cannot
+    // reduce this nest to a closed form the way it does with `total + 1`.
+    // This is the exact shape of el #132: n scans over n characters, pure
+    // CPU, ZERO allocation.
+    let s: String = "abcdefghij"
+    let total: Int = 0
+    let i: Int = 0
+    while i < n {
+        let j: Int = 0
+        while j < n {
+            let total = total + str_char_code(s, 0)
+            let j = j + 1
+        }
+        let i = i + 1
+    }
+    return total
+}
+
+fn run_one(mode: String, n: Int) {
+    let c0: Int = el_alloc_count()
+    let b0: Int = el_alloc_bytes()
+    let t0: Int = el_now_instant()
+
+    let r: Int = 0
+    if str_eq(mode, "linear")  { let r = work_linear(n) }
+    if str_eq(mode, "accum")   { let r = work_accum(n) }
+    if str_eq(mode, "compute") { let r = work_compute(n) }
+
+    let t1: Int = el_now_instant()
+    let c1: Int = el_alloc_count()
+    let b1: Int = el_alloc_bytes()
+
+    println(mode + "\t" + int_to_str(n)
+        + "\t" + int_to_str(c1 - c0)
+        + "\t" + int_to_str(b1 - b0)
+        + "\t" + int_to_str((t1 - t0) / 1000)
+        + "\t" + int_to_str(r))
+    return
+}
+
+fn sweep(mode: String) {
+    run_one(mode, 200)
+    run_one(mode, 400)
+    run_one(mode, 800)
+    run_one(mode, 1600)
+    return
+}
+
+fn main() -> Int {
+    println("mode\tn\tallocs\tbytes\tusec\tsink")
+    sweep("linear")
+    sweep("accum")
+    sweep("compute")
+    return 0
+}

lang/tests/native/test_elbench.el

@@ -0,0 +1,111 @@
+import "../../runtime/eltest.el"
+import "../../runtime/elbench.el"
+
+// test_elbench.el — proves the growth-curve classifier against KNOWN curves.
+//
+// Every series below is real measured data from lang/tests/bench/fitprobe.el
+// on a geometric sweep n = 200/400/800/1600. The classifier must be provable
+// without depending on a live defect existing, which is the whole point of
+// keeping controlled specimens.
+
+fn _s4(a: Int, b: Int, c: Int, d: Int) -> [Int] {
+    let l: [Int] = native_list_empty()
+    let l = native_list_append(l, a)
+    let l = native_list_append(l, b)
+    let l = native_list_append(l, c)
+    let l = native_list_append(l, d)
+    return l
+}
+
+test "classifies a linear allocation series as O(n)" {
+    // fitprobe `linear`, allocation count
+    let v = _s4(208, 409, 810, 1611)
+    assert elb_measured_curve(v, 10) == 2, "linear allocs should classify O(n)"
+}
+
+test "classifies a linear byte series as O(n)" {
+    // fitprobe `linear`, allocation bytes
+    let v = _s4(4786, 9682, 19474, 39658)
+    assert elb_measured_curve(v, 10) == 2, "linear bytes should classify O(n)"
+}
+
+test "classifies a quadratic byte series as O(n^2)" {
+    // fitprobe `accum`, allocation bytes -- the accumulator-rebuild shape
+    let v = _s4(20300, 80600, 321200, 1282400)
+    assert elb_measured_curve(v, 10) == 4, "accum bytes should classify O(n^2)"
+}
+
+test "accumulator count is linear -- proves count alone misses it" {
+    // Same run as above. The COUNT is exactly linear while bytes are
+    // quadratic. A count-only gate passes this defect clean.
+    let v = _s4(200, 400, 800, 1600)
+    assert elb_measured_curve(v, 10) == 2, "accum count classifies O(n)"
+    assert elb_gate(v, 2, 10) == 0, "count-only gate PASSES the quadratic"
+}
+
+test "classifies a quadratic time series as O(n^2)" {
+    // fitprobe `compute` -- el #132's shape: n scans over n characters
+    let v = _s4(67, 205, 818, 3268)
+    assert elb_measured_curve(v, 10) == 4, "compute time should classify O(n^2)"
+}
+
+test "REFUSES an all-zero series instead of calling it O(1)" {
+    // fitprobe `compute` allocation count. Pure CPU, allocates nothing.
+    // Reporting O(1) here would be a confident answer with nothing behind it.
+    let v = _s4(0, 0, 0, 0)
+    assert elb_gate(v, 2, 10) == 3, "all-zero series must be REFUSED"
+    assert elb_measured_curve(v, 10) < 0, "unclassifiable returns -1"
+}
+
+test "REFUSES an implausibly flat series" {
+    // The shape produced when clang closes a loop to a multiply: a real
+    // answer, no work done, no movement across an 8x input range.
+    let v = _s4(1000, 1001, 1002, 1003)
+    assert elb_gate(v, 2, 10) == 3, "hard-flat series must be REFUSED"
+}
+
+test "gate FAILS a quadratic declared as linear" {
+    let v = _s4(20300, 80600, 321200, 1282400)
+    assert elb_gate(v, 2, 10) == 1, "O(n^2) measured vs O(n) declared must FAIL"
+}
+
+test "gate PASSES a linear series declared as linear" {
+    let v = _s4(208, 409, 810, 1611)
+    assert elb_gate(v, 2, 10) == 0, "O(n) measured vs O(n) declared must PASS"
+}
+
+test "gate reports BETTER when measured beats the declared bound" {
+    let v = _s4(208, 409, 810, 1611)
+    assert elb_gate(v, 4, 10) == 4, "O(n) measured vs O(n^2) declared is BETTER"
+}
+
+test "gate reports INDETERMINATE on disagreeing ratios" {
+    // fitprobe `linear` WALL TIME at these sizes: 26/19/43/78 microseconds.
+    // Ratios 0.73, 2.26, 1.81 disagree well past the noise threshold. The
+    // honest answer is "cannot tell", not a classification -- this is exactly
+    // why benchmarks need auto-scaled iteration counts rather than one shot.
+    let v = _s4(26, 19, 43, 78)
+    assert elb_gate(v, 2, 10) == 2, "disagreeing ratios must be INDETERMINATE"
+}
+
+test "black_box is a real barrier and returns its input" {
+    assert el_black_box(42) == 42, "black_box is value-preserving"
+    let s: Int = 0
+    let i: Int = 0
+    while i < 100 {
+        // Bind the call before using it in arithmetic: `x + call(...)`
+        // lowers to el_str_concat() on integers. Same inference defect
+        // as `call(...) == y` lowering to str_eq().
+        let bx: Int = el_black_box(1)
+        let s = s + bx
+        let i = i + 1
+    }
+    assert s == 100, "black_box does not disturb the computation"
+}
+
+test "curve names round-trip" {
+    assert elb_curve_from_name("O(n)") == 2, "O(n) parses"
+    assert elb_curve_from_name("O(n^2)") == 4, "O(n^2) parses"
+    assert str_eq(elb_curve_name(4), "O(n^2)"), "O(n^2) renders"
+    assert elb_curve_from_name("O(nonsense)") < 0, "unknown curve is -1"
+}

lang/tests/native/test_lexer_scaling.el

@@ -0,0 +1,178 @@
+import "../../runtime/eltest.el"
+import "../../runtime/elbench.el"
+
+// test_lexer_scaling.el — THE ARMED GATE.
+//
+// This is the regression test that would have caught el #132.
+//
+// #132 was a strlen() inside str_char_code() and str_slice(). The lexer walks
+// source one character at a time, so every character access rescanned the whole
+// remaining input: O(n) per character over n characters = O(n^2). It shipped for
+// months. It was found by a geometric sweep, not by reading code.
+//
+// So this test IS a geometric sweep. It scans a string of length n, character by
+// character, at four doubling sizes, and asserts the cost is linear. If anyone
+// reintroduces a per-character rescan — in str_char_code, in str_slice, in any
+// accessor the lexer leans on — the measured curve becomes O(n^2) and this fails.
+//
+// The value is in it being ARMED, not in it currently failing. It passes today
+// because #132 is fixed. That is the correct state for a regression gate.
+//
+// Note the deliberate `let c: Int = str_char_code(...)` binding in the scan loop.
+// Inlining it as `total + str_char_code(s, i)` lowers to el_str_concat() on
+// integers — the Plus arm of the operator-typing family, still open at the time
+// of writing. Binding first is the safe form.
+
+// _mk_string — build a string of length >= n by DOUBLING.
+//
+// Deliberately not `s = s + "x"` n times: that is itself quadratic in bytes and
+// would contaminate the very measurement this test exists to take. Doubling
+// allocates ~2n total.
+fn _mk_string(n: Int) -> String {
+    let s: String = "abcdefgh"
+    while str_len(s) < n {
+        let s = s + s
+    }
+    return s
+}
+
+// _scan — walk the string one character at a time, REPS times.
+//
+// This is the lexer's access pattern reduced to its essential shape. The
+// repetitions lift the measurement clear of timer resolution; without them the
+// smaller sizes land in noise and the classifier correctly reports
+// INDETERMINATE rather than guessing.
+fn _scan(s: String, n: Int, reps: Int) -> Int {
+    let total: Int = 0
+    let r: Int = 0
+    while r < reps {
+        let i: Int = 0
+        while i < n {
+            let c: Int = str_char_code(s, i)
+            let total = total + c
+            let i = i + 1
+        }
+        let r = r + 1
+    }
+    return total
+}
+
+// _measure_scan — microseconds for a full scan sweep point.
+fn _measure_scan(n: Int, reps: Int) -> Int {
+    let s: String = _mk_string(n)
+    // WARMUP, discarded. Without it the small-n end of the sweep is dominated
+    // by cold caches and reads as superlinear on genuinely linear work --
+    // measured ratios 3.37 2.92 1.76 1.65 on exactly this workload.
+    let w: Int = _scan(s, n, 2)
+    let wj: Int = el_black_box(w)
+    let t0: Int = el_now_instant()
+    let got: Int = _scan(s, n, reps)
+    let t1: Int = el_now_instant()
+    // Feed the result through the barrier so the scan cannot be elided.
+    let sink: Int = el_black_box(got)
+    if sink == 0 { println("") }
+    return (t1 - t0) / 1000
+}
+
+fn _series4(a: Int, b: Int, c: Int, d: Int) -> [Int] {
+    let l: [Int] = native_list_empty()
+    let l = native_list_append(l, a)
+    let l = native_list_append(l, b)
+    let l = native_list_append(l, c)
+    let l = native_list_append(l, d)
+    return l
+}
+
+test "character scan is LINEAR in time -- regression gate for el #132" {
+    let reps: Int = 40
+    let t1: Int = _measure_scan(16384, reps)
+    let t2: Int = _measure_scan(32768, reps)
+    let t3: Int = _measure_scan(65536, reps)
+    let t4: Int = _measure_scan(131072, reps)
+    let series: [Int] = _series4(t1, t2, t3, t4)
+
+    let verdict: Int = elb_gate(series, 2, 50)
+    let measured: Int = elb_measured_curve(series, 50)
+
+    // Report the actual numbers regardless of outcome. A gate that fires
+    // without showing its evidence is just an assertion.
+    println("      scan us: " + int_to_str(t1) + " " + int_to_str(t2) + " "
+        + int_to_str(t3) + " " + int_to_str(t4)
+        + "  -> " + elb_curve_name(measured) + " [" + elb_verdict_name(verdict) + "]")
+
+    // PASS (0) or BETTER (4) are both acceptable. FAIL (1) means someone
+    // reintroduced superlinear per-character cost. REFUSED (3) or
+    // INDETERMINATE (2) mean the measurement is untrustworthy -- which is
+    // also a failure of this test, deliberately: a gate that cannot measure
+    // must not report success.
+    assert verdict == 0 || verdict == 4, "character scan must measure O(n) or better"
+}
+
+test "string building by doubling stays linear in allocated bytes" {
+    let b1: Int = el_alloc_bytes()
+    let s1: String = _mk_string(8192)
+    let b2: Int = el_alloc_bytes()
+    let s2: String = _mk_string(16384)
+    let b3: Int = el_alloc_bytes()
+    let s3: String = _mk_string(32768)
+    let b4: Int = el_alloc_bytes()
+    let s4: String = _mk_string(65536)
+    let b5: Int = el_alloc_bytes()
+
+    let series: [Int] = _series4(b2 - b1, b3 - b2, b4 - b3, b5 - b4)
+    let verdict: Int = elb_gate(series, 2, 1000)
+    let measured: Int = elb_measured_curve(series, 1000)
+    println("      bytes: " + int_to_str(b2 - b1) + " " + int_to_str(b3 - b2) + " "
+        + int_to_str(b4 - b3) + " " + int_to_str(b5 - b4)
+        + "  -> " + elb_curve_name(measured) + " [" + elb_verdict_name(verdict) + "]")
+
+    assert verdict == 0 || verdict == 4, "doubling build must be O(n) in bytes"
+    assert str_len(s4) >= 65536, "final string reached the requested size"
+}
+
+// _scan_quadratic — a DELIBERATELY quadratic scan: for each position, rescan
+// from the start. This is precisely what el #132 did — strlen() from offset 0
+// on every character access — reproduced here so the gate can be proven to
+// FIRE, not merely to pass on healthy code. An unproven gate is decoration.
+fn _scan_quadratic(s: String, n: Int) -> Int {
+    let total: Int = 0
+    let i: Int = 0
+    while i < n {
+        let j: Int = 0
+        while j < i {
+            let c: Int = str_char_code(s, j)
+            let total = total + c
+            let j = j + 1
+        }
+        let i = i + 1
+    }
+    return total
+}
+
+fn _measure_quadratic(n: Int) -> Int {
+    let s: String = _mk_string(n)
+    let w: Int = _scan_quadratic(s, 64)
+    let wj: Int = el_black_box(w)
+    let t0: Int = el_now_instant()
+    let got: Int = _scan_quadratic(s, n)
+    let t1: Int = el_now_instant()
+    let sink: Int = el_black_box(got)
+    return (t1 - t0) / 1000
+}
+
+test "the gate FIRES on a live quadratic scan -- proves it is armed" {
+    let q1: Int = _measure_quadratic(1024)
+    let q2: Int = _measure_quadratic(2048)
+    let q3: Int = _measure_quadratic(4096)
+    let q4: Int = _measure_quadratic(8192)
+    let series: [Int] = _series4(q1, q2, q3, q4)
+
+    let verdict: Int = elb_gate(series, 2, 50)
+    let measured: Int = elb_measured_curve(series, 50)
+    println("      quad us: " + int_to_str(q1) + " " + int_to_str(q2) + " "
+        + int_to_str(q3) + " " + int_to_str(q4)
+        + "  -> " + elb_curve_name(measured) + " [" + elb_verdict_name(verdict) + "]")
+
+    assert measured == 4, "a rescan-from-zero workload must classify O(n^2)"
+    assert verdict == 1, "declared O(n) against measured O(n^2) must FAIL the gate"
+}

lang/tests/runtime/operator_typing_test.el

@@ -0,0 +1,28 @@
+fn getstr(x: String) -> String { return x }
+fn getint(x: Int) -> Int { return x }
+fn ok(label: String) -> Void { println("ok   " + label) }
+fn bad(label: String) -> Void { println("FAIL " + label) }
+
+let s1: String = "hello"
+let s2: String = "hello"
+let s3: String = "world"
+let i1: Int = 5
+let i2: Int = 5
+let i3: Int = 9
+
+if "abc" == "abc" { ok("str literal eq") } else { bad("str literal eq") }
+if "abc" == "xyz" { bad("str literal ne") } else { ok("str literal ne") }
+if s1 == s2 { ok("str var eq") } else { bad("str var eq") }
+if s1 == s3 { bad("str var ne") } else { ok("str var ne") }
+if getstr("hi") == "hi" { ok("str call vs literal") } else { bad("str call vs literal") }
+if s1 == getstr("hello") { ok("str var vs call") } else { bad("str var vs call") }
+if s1 == getstr("nope") { bad("str var vs call ne") } else { ok("str var vs call ne") }
+if i1 == i2 { ok("int var eq") } else { bad("int var eq") }
+if i1 == i3 { bad("int var ne") } else { ok("int var ne") }
+if getint(5) == i1 { ok("int call vs var") } else { bad("int call vs var") }
+if getint(9) == i1 { bad("int call vs var ne") } else { ok("int call vs var ne") }
+if s1 != s3 { ok("str NOTEQ") } else { bad("str NOTEQ") }
+if s1 != s2 { bad("str NOTEQ same") } else { ok("str NOTEQ same") }
+if i1 != i3 { ok("int NOTEQ") } else { bad("int NOTEQ") }
+if getint(9) != i1 { ok("int call NOTEQ") } else { bad("int call NOTEQ") }
+println("done")